From: kevin gannon (kevin@gannons.net)
Date: Mon Nov 14 2005 - 08:22:36 GMT-3
Which part are you having problems ? Is it the spoke to spoke
tarffic that doesnt work ?
Below is the frame relay FAQ from CCO which has useful pointers
about most issues:
http://www.cisco.com/en/US/tech/tk713/tk237/technologies_q_and_a_item09186a008009457a.shtml
Thanks & Regards
Kevin
On 11/14/05, Arun Arumuganainar <aarumuga@hotmail.com> wrote:
> Here are conditions .
>
> 1) Topology HUB and SPOKE . R3=> Hub R4 and R5 => Spoke .
> 2) Use only Physical interfaces on all the 3 routers
> 3) Do not use Dynamic mapping ( No Inverse ARP )
> 4) Do not configure static Layer 3 to Layer 2 Mapping on spokes
>
> Just wondering How to configure this ?. Any body can throw some light on it .
> It would be great !!!
>
> Thanks and Regards
> Arun
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:06 GMT-3