From: Thomwin Chen (thomwin_chen@yahoo.com)
Date: Mon Nov 14 2005 - 01:42:16 GMT-3
Steven,
the burst interval is automatically set to 200 ms.
you can adjust this burst interval manually.
Rgds,
Thomwin
steven richards <ccie_2005@hotmail.com> wrote:
Hello,
I am trying to use priority queueing beacuse I am interested in guarenteing
a certain amount of bandwidth, withought going over the guereenteed
bandwidth. One thing I noticed is that with configuring priority queueing
there appears to be a burst automatically configured. Is there a way to just
configure priority queueing withought that autoconfugred burst ?
Thanks,
R2#show policy-map interface e0/0
Ethernet0/0
Service-policy output: QOS
Class-map: PREC2 (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: ip precedence 2
Queueing
Strict Priority
Output Queue: Conversation 264
Bandwidth 128 (kbps) Burst 3200 (Bytes) <----- Burst automatically
configured ?
(pkts matched/bytes matched) 0/0
(total drops/bytes drops) 0/0
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:06 GMT-3