RE: bandwidth command

From: Dennis J. Hartmann (dhartma5@optonline.net)
Date: Thu Nov 10 2005 - 21:56:51 GMT-3

• Next message: Dennis J. Hartmann: "RE: Good times to reboot routers and/or switches during lab."
• Previous message: Dennis J. Hartmann: "RE: tuning the tx-ring queue"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

        The bandwidth command also effects the amount of QoS-useable
bandwidth.

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Rajib Khan
Sent: Monday, August 01, 2005 1:33 AM
To: Tom Young; ccielab@groupstudy.com
Subject: Re: bandwidth command

no, bandwidth command under interface tells routing protocol how much
bandwidth it can use to calculate metric.
 
On the other hand speed 10 will also make band to 10mg
 
HTH
 
Raj
 

Tom Young <gitsyoung@yahoo.co.jp> wrote:
hi, group
A question about bandwidth command, if I set the bandwidth 10000 on a
FastEthernet interface, will the FE interface's real speed becomes 10Mbps?
thanks alot

__________________________________
Save the earth
http://pr.mail.yahoo.co.jp/ondanka/

• Next message: Dennis J. Hartmann: "RE: Good times to reboot routers and/or switches during lab."
• Previous message: Dennis J. Hartmann: "RE: tuning the tx-ring queue"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:06 GMT-3