From: Jaycee Cockburn - BCX SS (Jaycee.Cockburn@bcx.co.za)
Date: Thu Nov 10 2005 - 07:26:25 GMT-3
Hi L,
You could summarize all routes from R2/R3 into subnet classes that R1
knows...
Or the ugly way, just advertise a default route to R1....
Cheers
JC
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Loi, Choon Ho
Sent: 10 November 2005 11:58 AM
To: ccielab@groupstudy.com
Subject: RIPv2 --> RIPv1 Problem
Consider this scenario:
(transit)R1---------ripv1-----------R2----------ripv2--------R3(Stub)
Network from R1 being propagate to R2 but, R1 can't learn any route from
either R3/R2 What can I do to advertise routes from RIPv2 to RIPv1 If
RIPv2 have multiple VLSM route.
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:06 GMT-3