From: JP (jenseike@start.no)
Date: Thu Nov 10 2005 - 05:31:04 GMT-3
Hi group.
I am trying to sett he fr-de bit
Will this two command do the exact same thing, is there any situations one
way are the right way than the other? :
frame-relay de-list 1 protocol ip list 199
interface s0/0
frame-relay de-group 1 203
frame-relay de-group 1 205
frame-relay de-group 1 206
interface s0/0
frame-relay de-group 1 203
frame-relay de-group 1 205
frame-relay de-group 1 206
and this
class-map match-all fr-de
match access-group 199
!
!
policy-map FR-DE
class fr-de
set fr-de
interface Serial0/0
ip address 172.16.1.5 255.255.255.0
service-policy output FR-DE
encapsulation frame-relay
ip ospf network point-to-multipoint
frame-relay map ip 7.7.12.3 203 broadcast
frame-relay map ip 7.7.12.5 205 broadcast
frame-relay map ip 7.7.12.6 206 broadcast
no frame-relay inverse-arp
frame-relay lmi-type ansi
Jens P
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:06 GMT-3