From: simon hart (simon@harttel.com)
Date: Tue Nov 08 2005 - 18:06:04 GMT-3
Hi Raj,
Byte Limit is the maximum number of bytes that can be sent in an interval.
If you have credits within be, then you can send the accumlative of be and
bc. In your example bc = 16000 bits and be = 12000 bits, therefore your
limit in one interval is 28000 bits. Divide this by 8 and you have the
maximum number of bytes you can send in an interval = 3500 bytes ---- QED
Similarly the Increment is the number of bytes you can send in each interval
without Be. Bc = 16000 bits, therefore number of bytes = 16000/8 = 2000
Hope that helps
Simon
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Chacko, Raj
Sent: 08 November 2005 19:26
To: ccielab@groupstudy.com
Subject: GTS question
Hi,
Under the following show output, what is the Byte limit and
Increment Bytes value mean, how does the IOS derive these?
TIA,
R1#sh traffic-shape
Interface Se0.1
Access Target Byte Sustain Excess Interval Increment Adapt
VC List Rate Limit bits/int bits/int (ms) (bytes)
Active
- 64000 3500 16000 12000 250 2000 -
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:05 GMT-3