From: kevin gannon (kevin@gannons.net)
Date: Tue Nov 08 2005 - 04:46:08 GMT-3
That will allow the change to be made to all interfaces on the
box and not just Serial 0/0 say no ?.
Thanks & Regards
Kevin
On 11/7/05, mani poopal <mani_ccie@yahoo.com> wrote:
> Hi Kevin,
>
> Try these commands.
>
>
>
> Privilege exec leve 1 configure t
>
> Privilege configure level 1 interface
>
> Privilege interface level 1 description
>
>
>
> Mani
>
>
> kevin gannon <kevin@gannons.net> wrote:I am trying to configure using priv levels so that a user can only configure
> "interface serial 0/0" and then change says its description. I have tried
>
> privilege interface level 1 ip address
> privilege interface level 1 ip
> privilege configure level 1 interface
> privilege exec level 1 configure
>
> What I am missing is the magic to only allow Serial 0/0 to be
> configured ?
>
> Regards
> Kevin
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
> B.ENG,MCSE,CCNP,CCSP,CCIE#14645
> (416)431 9929
> MANI_CCIE@YAHOO.COM
>
> ---------------------------------
> Yahoo! FareChase - Search multiple travel sites in one click.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:05 GMT-3