From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Sun Nov 06 2005 - 04:39:39 GMT-3
Hello,
I have a topology like this, and the Routing Protocol is EIGRP (lab 18 IE)
R5 ----- (vlan 58) * Sw2 * (vlan 18) ---- R1
* *
*=============FR==============
I do not what R1 in Vlan 18 to use Sw2 as transit to get to Vlan 58 . So I
configured to be a Stub Router in EIGRP (like in the solution).
This is the configuration for Sw2
Rack1SW2#show run | be eigrp 10
router eigrp 10
timers active-time 5
network 150.1.0.0
network 156.1.0.0
no auto-summary
eigrp stub connected
and this are the connected routes in sw2
156.1.0.0/16 is variably subnetted, 12 subnets, 2 masks
C 156.1.18.0/24 is directly connected, Vlan18
C 156.1.8.0/24 is directly connected, Vlan8
C 156.1.58.0/24 is directly connected, Vlan58
150.1.0.0/24 is subnetted, 5 subnets
C 150.1.8.0 is directly connected, Loopback0
But R1 stills sees as the best Path, Sw2 for Vlan 58
Rack1R1#show ip route 156.1.58.0
Routing entry for 156.1.58.0/24
Known via "eigrp 10", distance 90, metric 3104, type internal
Redistributing via eigrp 10
Last update from 156.1.18.8 on Ethernet0, 00:04:01 ago
Routing Descriptor Blocks:
* 156.1.18.8, from 156.1.18.8, 00:04:01 ago, via Ethernet0
Route metric is 3104, traffic share count is 1
Total delay is 1010 microseconds, minimum bandwidth is 10000 Kbit
Reliability 255/255, minimum MTU 1500 bytes
Loading 1/255, Hops 1
Can anyone please give a light here, I been fighting with this but It doesn't
work!
Any advice
Thanks
--- Victor Cappuccio cvictor@protokolgroup.com ..O. ....O OOO
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:05 GMT-3