From: Tony Schaffran (groupstudy@cconlinelabs.com)
Date: Wed Nov 02 2005 - 11:29:38 GMT-3
Your show version does not indicate any flash is installed.
Could be bad flash.
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Leonard Lu
Sent: Tuesday, November 01, 2005 7:15 PM
To: ccielab@groupstudy.com
Subject: 2500 router held in boot mode
Hi, All,
I need help for a 2500 router held in boot mode. Here is the output of show
version command. You can see there is no flash memory and DRAM has only 2MB
memory size. What is wrong with this 2500 router? Anyway to repair it?
Thanks for the help.
--Leonard
BB1(boot)>en
BB1(boot)#sh flash
^
% Invalid input detected at '^' marker.
BB1(boot)#
BB1(boot)#sh version
Cisco Internetwork Operating System Software
IOS (tm) 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c)XA, PLATFORM
SPECIFIC RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1996 by cisco Systems, Inc.
Compiled Thu 20-Feb-97 21:39 by loreilly
Image text-base: 0x01010000, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c)XA, PLATFORM SPECIFIC RELEASE
SOFTWARE (fc1)
BB1 uptime is 5 minutes
System restarted by power-on
Running default software
cisco 2500 (68030) processor (revision D) with 1024K/1024K bytes of memory.
Processor board ID 03270333, with hardware revision 00000000
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
32K bytes of non-volatile configuration memory.
Configuration register is 0x2102
BB1(boot)#
---------------------------------
Yahoo! FareChase - Search multiple travel sites in one click.
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:04 GMT-3