From: Niche (jackyliu419@gmail.com)
Date: Tue Nov 01 2005 - 23:17:15 GMT-3
Hi Schulz,
Sorry that I missed out, enable that command on router B
Cheers~
Jacky
On 11/2/05, Niche <jackyliu419@gmail.com> wrote:
>
> Hi Schulz,
>
> Try enable "standby preempt" and test again.
>
> Also, you can try to do a test failover and "show standby" to verify the
> priority change before you apply that command. Then you may find out what
> happened.
>
> Cheers~
> Jacky
>
> On 11/2/05, Schulz, Dave <DSchulz@dpsciences.com> wrote:
> >
> > Yes, that is correct, Victor. The eigrp 1 was from a previous "attempt".
> > Sorry. What I wanted to accomplish here is that Campus-A would always be
> > the
> > primary if everything is working. However, if the Serial on A goes down,
> > Then
> > all traffic would be diverted to B. However, if Serial on B goes down,
> > then B
> > would use the ethernet to reach A and through the Serial on A (assuming
> > the A
> > is back up). This is what I was trying to accomplish, do I have this
> > wrong?
> > I am interested in your solution to this if you can detail it.
> >
> > Dave
> >
> > -----Original Message-----
> > From: Victor Cappuccio
> > To: Schulz, Dave; ccielab@groupstudy.com
> > Sent: 11/1/2005 5:33 PM
> > Subject: Re: Route distribution problem with EIGRP/OSPF and HSRP
> >
> > Also::
> >
> > ON CAMPUS A
> >
> >
> >
> > > interface FastEthernet0/0
> >
> > > description Campus server farm
> >
> > > bandwidth 10000
> >
> > > ip address 172.16.1.33 <http://172.16.1.33>
255.255.255.224<http://255.255.255.224>
> >
> > > delay 100
> >
> > > duplex auto
> >
> > > speed auto
> >
> > > standby ip 172.16.1.50 <http://172.16.1.50>
> >
> > > standby priority 105
> >
> > > standby preempt
> >
> > > standby track Serial0/0.1 10
> >
> >
> >
> > ON CAMPUS B
> >
> > > interface FastEthernet0/0
> >
> > > description Campus server farm
> >
> > > bandwidth 10000
> >
> > > ip address 172.16.1.34 <http://172.16.1.34>
255.255.255.224<http://255.255.255.224>
> >
> > > delay 100
> >
> > > duplex auto
> >
> > > speed auto
> >
> > > standby ip 172.16.1.50 <http://172.16.1.50>
> >
> > > standby priority 100
> >
> > > standby track Serial0/0.1 10
> >
> >
> >
> > Also I can observe that this HSRP configuration has no sense :S
> >
> >
> >
> > On Campus A, The Priority will be 105 (default 100), and in Campus B the
> > priority will be 100, so if I what to track a serial lets say the serial
> > on
> > Campus A I will just leave the preempt option in both sides..
> >
> > So witch one do you want to track?
> >
> > Please can you clarify this a little bit (also please observe that in
> > Campus
> > A in the ospf 1 process you are redistributing a dummy eigrp process
> > (1), is
> > that in the original configuration I'm just curios
> >
> >
> >
> > HTH & Thanks
> >
> >
> >
> >
> >
> > ---
> > Victor Cappuccio
> > cvictor@protokolgroup.com
> > ..O.
> > ....O
> > OOO
> > ----- Original Message -----
> > From: "Victor Cappuccio" < cvictor@protokolgroup.com>
> > To: "Schulz, Dave" <DSchulz@dpsciences.com>; < ccielab@groupstudy.com>
> > Sent: Tuesday, November 01, 2005 6:18 PM
> > Subject: Re: Route distribution problem with EIGRP/OSPF and HSRP
> >
> >
> > > Hello Dave, please double check your subnets in the Serial
> > > I'm going to lab this one tonight
> > > 252 in the mask == 11111100
> > > Gives me the use 1 or 2 (not 6 ;))
> > >
> > > ---
> > > Victor Cappuccio
> > > cvictor@protokolgroup.com
> > > ..O.
> > > ....O
> > > OOO
> > > ----- Original Message -----
> > > From: "Schulz, Dave" <DSchulz@dpsciences.com>
> > > To: < ccielab@groupstudy.com>
> > > Sent: Tuesday, November 01, 2005 4:32 PM
> > > Subject: Route distribution problem with EIGRP/OSPF and HSRP
> > >
> > >
> > > > I am trying to get a lab working with route redistribution and
> > having an
> > > > issue. Campus-A and Campus-B routers are supposed to be
> > redistributing
> > > > OSPF to EIGRP. I would like to get Campus-B to prefer EIGRP(on
> > fa0/0)
> > > > and then, if the S0/0.1 on Campus-A goes down, then both routers
> > would
> > > > switch to the Serial (ospf) through the Campus-B router. However, I
> > > > cannot seem to get the Campus-B router to prefer the EIGRP (Fa0/0).
> > I
> > > > thought the administrative distance (being preferable on EIGRP)
> > would
> > > > address this, but that doesn't appear to be the case. I must be
> > missing
> > > > something here. Any ideas? Here are the configs.....
> > > >
> > > > Core network
> > > >
> > > > S0/0.1 s0/0.1
> > > > | |
> > > > A B
> > > > | fa0/0 | fa0/0
> > > > _|_______|_
> > > >
> > > >
> > > >
> > > > CAMPUS-A
> > > >
> > > > interface FastEthernet0/0
> > > > description Campus server farm
> > > > bandwidth 10000
> > > > ip address 172.16.1.33 <http://172.16.1.33> 255.255.255.224
> > <http://255.255.255.224>
> > > > delay 100
> > > > duplex auto
> > > > speed auto
> > > > standby ip 172.16.1.50 <http://172.16.1.50>
> > > > standby priority 105
> > > > standby preempt
> > > > standby track Serial0/0.1 10
> > > > !!
> > > > interface Serial0/0.1 point-to-point
> > > > description Link to Site-2
> > > > bandwidth 2000
> > > > ip address 172.16.1.2 <http://172.16.1.2>
255.255.255.252<http://255.255.255.252>
> > > > frame-relay interface-dlci 313
> > > > !
> > > > router eigrp 2
> > > > redistribute ospf 1 route-map O2E
> > > > passive-interface default
> > > > no passive-interface FastEthernet0/0
> > > > network 172.16.1.0 <http://172.16.1.0> 0.0.0.255 <http://0.0.0.255>
> > > > no auto-summary
> > > > no eigrp log-neighbor-changes
> > > > !
> > > > router ospf 1
> > > > log-adjacency-changes
> > > > redistribute eigrp 2 subnets route-map E2O
> > > > redistribute eigrp 1
> > > > network 172.16.1.2 <http://172.16.1.2> 0.0.0.0 <http://0.0.0.0> area
> > 0
> > > > !!
> > > > route-map E2O deny 10
> > > > match tag 100
> > > > !
> > > > route-map E2O permit 20
> > > > set metric 10
> > > > set metric-type type-1
> > > > set tag 200
> > > > !
> > > > route-map O2E deny 10
> > > > match tag 200
> > > > !
> > > > route-map O2E permit 20
> > > > set metric 100000 1 255 1 1500
> > > > set tag 100
> > > > !
> > > > !
> > > >
> > > > CAMPUS-B
> > > > !!
> > > > interface FastEthernet0/0
> > > > description Campus server farm
> > > > bandwidth 10000
> > > > ip address 172.16.1.34 <http://172.16.1.34>
255.255.255.224<http://255.255.255.224>
> > > > delay 100
> > > > duplex auto
> > > > speed auto
> > > > standby ip 172.16.1.50 <http://172.16.1.50>
> > > > standby priority 100
> > > > standby track Serial0/0.1 10
> > > > !
> > > > interface Serial0/0.1 point-to-point
> > > > description Link to Site-3
> > > > bandwidth 2000
> > > > ip address 172.16.1.6 <http://172.16.1.6>
255.255.255.252<http://255.255.255.252>
> > > > frame-relay interface-dlci 274
> > > > !
> > > > router eigrp 2
> > > > redistribute ospf 1 route-map O2E
> > > > passive-interface default
> > > > no passive-interface FastEthernet0/0
> > > > network 172.16.1.0 <http://172.16.1.0> 0.0.0.255 <http://0.0.0.255>
> > > > no auto-summary
> > > > no eigrp log-neighbor-changes
> > > > !
> > > > router ospf 1
> > > > log-adjacency-changes
> > > > redistribute eigrp 2 subnets route-map E2O
> > > > network 172.16.1.6 <http://172.16.1.6> 0.0.0.0 <http://0.0.0.0> area
> > 0
> > > > !!
> > > > route-map E2O deny 10
> > > > match tag 100
> > > > !
> > > > route-map E2O permit 20
> > > > set metric 10
> > > > set metric-type type-1
> > > > set tag 200
> > > > !
> > > > route-map O2E deny 10
> > > > match tag 200
> > > > !
> > > > route-map O2E permit 20
> > > > set metric 100000 1 255 1 1500
> > > > set tag 100
> > > > !
> > > >
> > > >
> > > > Campus-B router ......doing show ip eigrp top, shows:
> > > >
> > > > IP-EIGRP Topology Table for AS(2)/ID(172.16.1.34<http://172.16.1.34>
> > )
> > > >
> > > > Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
> > > > r - reply Status, s - sia Status
> > > >
> > > > P 192.168.10.12 <http://192.168.10.12>
255.255.255.252<http://255.255.255.252>,
> > 1 successors, FD is 25856, tag is
> > 100
> > > > via Redistributed (25856/0)
> > > > P 172.16.1.32 <http://172.16.1.32>
255.255.255.224<http://255.255.255.224>,
> > 1 successors, FD is 281600
> > > > via Connected, FastEthernet0/0
> > > > P 172.16.1.4 <http://172.16.1.4>
255.255.255.252<http://255.255.255.252>,
> > 1 successors, FD is 1792000
> > > > via Connected, Serial0/0.1
> > > > P 172.16.1.0 <http://172.16.1.0>
255.255.255.252<http://255.255.255.252>,
> > 1 successors, FD is 1817600
> > > > via 172.16.1.33 <http://172.16.1.33> (1817600/1792000),
> > FastEthernet0/0
> > > > Campus-B#
> > > > !
> > > >
> > > > Dave Schulz, CCDP, CCNP, CCSP
> > > > Project Manager / TAC Supervisor
> > > > Data Processing Sciences Corporation
> > > > 10810 Kenwood Road
> > > > Cincinnati, Ohio 45242
> > > > Phone - (513) 791-7100 ext.7411
> > > > Fax - (513) 791-4676
> > > > Email: dschulz@dpsciences.com <mailto:dschulz@dpsciences.com >
> > > >
> > > >
> > _______________________________________________________________________
> > > > Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:04 GMT-3