From: Scott Morris (swm@emanon.com)
Date: Tue Nov 01 2005 - 13:04:25 GMT-3
You also have scrap paper and Windows Notepad!
_____
From: Sam - I Am [mailto:sam.futureccie@gmail.com]
Sent: Tuesday, November 01, 2005 11:03 AM
To: swm@emanon.com
Cc: Victor Cappuccio; Montiean; ccielab@groupstudy.com
Subject: Re: wildcard mask question
Sounds good, as per me we should know how to calculate the wilcard mask
manually. But if we are being given the option to use the calculator then
its great as it will save some time, head can concentrate on something else
during that time. Also, we might tend to make some human errors while
calculating in our heads. Thanks for your reply!
Sam
On 11/1/05, Scott Morris <swm@emanon.com> wrote:
Fortunately, you have the ability to have or not to have green eggs and ham.
While it's better to be able to do things in your head, you are allowed to
use Windows calculator.
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com ] On Behalf Of Sam
- I Am
Sent: Tuesday, November 01, 2005 10:07 AM
To: Victor Cappuccio
Cc: Montiean; ccielab@groupstudy.com
Subject: Re: wildcard mask question
Can we calculate the XOR and AND binary calculations through the scientific
calculator in the lab or we have do it manually?
Sam
On 10/30/05, Victor Cappuccio < cvictor@protokolgroup.com
<mailto:cvictor@protokolgroup.com> > wrote:
>
> Hi Montain
> it depends, because the first one (I have not done the calculations),
> will only permit Network Routes in the class
192.168.20.0/24<http://192.168.20.0/24>to
> 192.168.23.0/24 <http://192.168.23.0/24> (again I have not done the
> calculations for the wildcard I'm just trusting your values, but its a
> simple Xor and And operation in the binaries), and in the second case
> one will permit subnets (all 0's) / and also host in that
> range---
> IMHO I think that It will depend on your CCIE Lab Wording
>
> HTH
>
> Victor Cappuccio
> cvictor@protokolgroup.com
> ..O.
> ....O
> OOO
> ----- Original Message -----
> From: "Montiean" <noktes@bellsouth.net>
> To: < <mailto:ccielab@groupstudy.com> ccielab@groupstudy.com>
> Sent: Sunday, October 30, 2005 7:24 PM
> Subject: wildcard mask question
>
>
> > Folks,
> > Just want to get the idea on wildcard mask using acl in the lab.
> > For an example, let say we need to use only one statement in acl to
> filter
> > routes below
> >
> > 192.168.20.0/24 < http://192.168.20.0/24 <http://192.168.20.0/24> >
> > 192.168.21.0/24 <http://192.168.21.0/24>
> > 192.168.22.0/24 <http://192.168.22.0/24> <http://192.168.22.0/24>
> > 192.168.23.0/24 <http://192.168.23.0/24>
> >
> > So we can use either ways as below
> >
> > access-list 1 permit 192.168.20.0 <http://192.168.20.0>
0.0.3.0<http://0.0.3.0>
> > or
> > access-list 1 permit 192.168.20.0 <http://192.168.20.0>
0.0.3.255<http://0.0.3.255>
> >
> > The result is going to be the same but which way should be right in
> > the
> lab.
> > Any comments would be appreciate.
> >
> > Thanks,
> > Montiean
> >
> > ____________________________________________________________________
> > ___ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:04 GMT-3