From: Vincent Mashburn (vmashburn@fedex.com)
Date: Tue Nov 01 2005 - 11:12:56 GMT-3
In my experience, problems like this are usually the result of an IOS
bug.
Vince Mashburn
Engineer
901-263-5072
CCNP, CCDA, Network +
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Andy Tang
Sent: Monday, October 31, 2005 4:48 PM
To: ccielab@groupstudy.com
Subject: no spanning tree info available for FastEthernet0/7
Hello,
I am appreciated if someone can advise the reason why "no spanning tree
info available for FastEthernet0/7"
interface FastEthernet0/7
switchport access vlan 50
switchport mode access
speed 100
duplex full
spanning-tree portfast
spanning-tree bpduguard enable
end
Rack8SW1#s vlan brie
VLAN Name Status Ports
---- -------------------------------- ---------
-------------------------------
1 default active Fa0/4, Fa0/11, Fa0/12, Fa0/16
Fa0/17, Fa0/18, Fa0/19, Fa0/20
Fa0/21, Fa0/22, Fa0/23, Gi0/1
Gi0/2
2 VLAN0002 active Fa0/2
3 VLAN0003 active Fa0/3
8 VLAN0008 active Fa0/24
17 VLAN0017 active Fa0/1
33 VLAN0033 active
46 VLAN0046 active
50 VLAN0050 active Fa0/7, Fa0/8, Fa0/9, Fa0/10
58 VLAN0058 active Fa0/5
1002 fddi-default act/unsup
1003 token-ring-default act/unsup
1004 fddinet-default act/unsup
1005 trnet-default act/unsup
Rack8SW1#
Rack8SW1#s spanning-tree interface f0/7 detail
no spanning tree info available for FastEthernet0/7
Thanks & regards,
Andy
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:04 GMT-3