From: Daniel Berlinski (Daniel.Berlinski@telecom.co.nz)
Date: Sun Oct 30 2005 - 19:44:55 GMT-3
Hi there
This was posted sometime ago but still unanswered.
http://www.groupstudy.com/archives/ccielab/200310/msg01284.html Has
anyone ever seen this working? I've tried as per Flannagan's book
"Cisco Catalyst QoS" and got the same curious output from the "show
policy interface" command --> "match: access-group
10qm_police_inform_feature: CLASS_SHOW"
Configs:
policy-map rate=2M
class all-traffic
police 2000000 20000 exceed-action drop
interface FastEthernet0/3
no switchport
speed 100
duplex full
no snmp trap link-status
service-policy input rate=2M
no cdp enable
#sh polic int fa0/3
FastEthernet0/3
service-policy input: rate=2M
class-map: all-traffic (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
match: access-group 10qm_police_inform_feature: CLASS_SHOW
------------> What is it doing?
class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
match: any
0 packets, 0 bytes
5 minute rate 0 bps
Once again any ideas/critiques are appreciated!!!
Cheers
"This communication, including any attachments, is confidential.
If you are not the intended recipient, you should not read
it - please contact me immediately, destroy it, and do not
copy or use any part of this communication or disclose
anything about it. Thank you. Please note that this
communication does not designate an information system for
the purposes of the Electronic Transactions Act 2002."
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:55 GMT-3