From: Leigh Harrison (ccileigh@gmail.com)
Date: Sat Oct 29 2005 - 07:38:27 GMT-3
All,
I've got an ospf demand circuit configured up and it doesn't seem to be
playing the game.
I've debug'd ip packet (on R1) and I see the ospf packet (224.0.0.5)
being sent to 2.2.2.1 and then it brings the line up, even though I've
got demand circuit configured.
Am I missing something obvious ?
LH
-----------------------
I have:-
R1 --- frame --- R2
| --- ISDN --- |
-----------------------
R1
int bri 0
ip add 2.2.2.1 255.255.255.252
ip ospf demand-circut
dialer idle-timeout 10
dialer map ip 2.2.2.2 broadcast 11
dialer-group 1
isdn switch-type basic-net3
no cdp enable
dialer-list 1 protocol ip permit
int s0
ip add 1.1.1.1 255.255.255.0
.
.
router ospf 1
network 1.1.1.1 0.0.0.0 ar 0
network 2.2.2.1 0.0.0.0 ar 0
-----------------------
R2
int bri 0
ip add 2.2.2.2 255.255.255.252
ip ospf demand-circut
dialer idle-timeout 10
dialer map ip 2.2.2.1 broadcast 21
dialer-group 1
isdn switch-type basic-net3
no cdp enable
dialer-list 1 protocol ip permit
int s0
ip add 1.1.1.2 255.255.255.0
.
.
router ospf 1
network 1.1.1.2 0.0.0.0 ar 0
network 2.2.2.2 0.0.0.0 ar 0
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:55 GMT-3