From: The Great Ryan (pv.ryan@gmail.com)
Date: Fri Oct 28 2005 - 04:20:22 GMT-3
Thanks for reply!
Let me said something about it:
when the serial interface recevie becn from frame-relay switch, it
will only slow down to 48000bps but it will not set DE bit for
outgoing packet during this period.
is it right ?
What I need to set DE bit enable (for example , excess of 32kbps as
Discard eligible for the Frame-relay maximum thoughput is 128kbps) ?
Ryan
2005/10/28, Brian Dennis <bdennis@internetworkexpert.com>:
> No, the router will not set the DE bit with your configuration.
>
> HTH,
>
> Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
> bdennis@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987
> Direct: 775-745-6404 (Outside the US and Canada)
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> The Great Ryan
> Sent: Thursday, October 27, 2005 9:47 PM
> To: Cisco certification
> Subject: When will FTRS start to set DE-bit ?
>
> Hi, Group,
>
> In which case/condition, the frame-relay interface will set packet
> with DE-bit if I enable frame-relay traffic-shaping on serial
> interface ?
>
> If I have the following frame-relay class,for example, will it set
> fr-de bit during congestion ?
>
> map-class frame-relay FRTS
> frame-relay cir 128000
> frame-relay bc 16000
> frame-relay mincir 48000
> frame-relay adaptive-shaping becn
>
>
> Thanks !
> Ryan
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:54 GMT-3