From: The Great Ryan (pv.ryan@gmail.com)
Date: Fri Oct 28 2005 - 02:06:15 GMT-3
Without interesting interface, I think you don't need to configure
"dialer-group" on bri interface
If you choose to use dialer watch-group, you should define watch-list
& dialer map ip <ip-being-monitored> to kick the BRI up.
Regards,
Ryan
2005/10/28, George Cosmo <george.cosmo@gmail.com>:
> Case:
> *There is no routing protocol on ISDN, I am using dialer watch to provide
> backup. ISDN should only come up in case of network failure. *
> **
> - Do I need interesting traffic, as if I have a default route and I ping any
> address that is not in my routing table ISDN will come up.
> - Even there is a dialer watch applied ISDN will come up in case there is a
> interesting traffic.
> what is a good practice ? no interesting traffic define with dialer watch?
> thanks !
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:54 GMT-3