From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Thu Oct 27 2005 - 18:08:06 GMT-3
Reading the same link
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t2/ipv6/ftipv6c.htm
Had the solution
ipv6 prefix-list list3 seq 10 deny ::/0 (But this?)
ipv6 prefix-list list3 seq 15 permit ::/0 le 128 (Default Route)
----- Original Message -----
From: "Victor Cappuccio" <cvictor@protokolgroup.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, October 27, 2005 4:52 PM
Subject: IPV6 Question!
> Hello all,
>
> Sorry for this silly post, But there goes..
>
> Is something similar to ip prefix-list DEFAULT 0.0.0.0/0 le 32 in IPV6 ?
>
> My Question is because is you are required to filter some traffic and you
> are not allowed to use the ipv6 traffic-filter access-list-name {in |
out}
> and if running certain IGP like rip maybe the distribute-list could help
me
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t2/ipv6/ftipv6c.htm
>
>
> Thanks
>
> ---
> Victor Cappuccio
> cvictor@protokolgroup.com
> .O.
> ..O
> OOO
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:54 GMT-3