From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Thu Oct 27 2005 - 17:22:28 GMT-3
Hello Dave, Which IOS Version are you running?
I'm running this one Rack1R6#show ver | in IOS
IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.2(15)T16, RELEASE
SOFTWARE (fc2) and seems to work fine for me
Regards
PS:
RIP and OSPF Redistribution:
http://www.cisco.com/univercd/cc/td/doc/cisintwk/ics/cs001.htm
But It do not says anything about your issue :S
HTH http://www.cisco.com/warp/public/105/redist.html
--- Victor Cappuccio cvictor@protokolgroup.com .O. ..O OOO----- Original Message ----- From: "Schulz, Dave" <DSchulz@dpsciences.com> To: <ccielab@groupstudy.com> Sent: Thursday, October 27, 2005 3:59 PM Subject: Redistribution metrics and route-maps
> I cannot seem to find any information on this within the doc CD as to > why this should or should not be an issue. However, when doing > redistribution....and, using route-maps.... I have experienced issues > where the redistribution fails to take place when adding the metrics on > the redistribution command line (using route-maps). For example..... > > router ospf 1 > redistribute rip route-map RIP2OSPF metric 10 > metric-type 1 subnets > > route-map RIP2OSPF permit 10 > match ip add 1 > > access-list 1 permit 192.168.0.0 0.0.255.255 > > However, when changing to the following (metric info in the > route-maps).....things work....(weird, almost like the router can't > handle too much information on the redistribute command line. Any > ideas? > > > router ospf 1 > redistribute rip route-map RIP2OSPF subnets > > route-map RIP2OSPF permit 10 > match ip add 1 > set metric 10 > set metric-type 1 > > access-list 1 permit 192.168.0.0 0.0.255.255 > > > > Dave Schulz, > Email: dschulz@dpsciences.com <mailto:dschulz@dpsciences.com > > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:54 GMT-3