From: Quetta Walla (quetta_1@lycos.com)
Date: Thu Oct 27 2005 - 08:03:10 GMT-3
Hi,
I have to disagree with Lee here.
I have a setup r1--area 1---r4---area 0-----r6
r4 has area 1 range 11.11.0.0 255.255.0.0 command
sh ip route ospf in r6 shows (only the summarized route is there)
O IA 11.11.0.0/16 [110/64] via 10.10.24.4, 00:40:53, Serial0
You might have virtual-link between r1 and r2 in which case you also need the area range command on r1.
--
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:54 GMT-3