From: Nadeem Zahid \(iszahid\) (iszahid@cisco.com)
Date: Fri Oct 21 2005 - 11:33:27 GMT-3
Fixed it - never mind.
-----Original Message-----
From: Nadeem Zahid (iszahid)
Sent: Friday, October 21, 2005 7:13 AM
To: 'cacca mucca'; ccielab@groupstudy.com
Subject: RE: IE Lab-2
But that does not seem to work...
I cannot ping R6 from R2.
-----Original Message-----
From: cacca mucca [mailto:caccamucca@hotmail.com]
Sent: Friday, October 21, 2005 5:33 AM
To: Nadeem Zahid (iszahid); ccielab@groupstudy.com
Subject: RE: IE Lab-2
Pls take a look at the answer key for that section. Answer key is
correct.
>From: "Nadeem Zahid (iszahid)" <iszahid@cisco.com>
>Reply-To: "Nadeem Zahid (iszahid)" <iszahid@cisco.com>
>To: "Cisco certification" <ccielab@groupstudy.com>
>Subject: IE Lab-2
>Date: Thu, 20 Oct 2005 21:57:48 -0700
>
>Can anyone explain to me the switching section of IE labe-2?
>R6 interfaces f1/0/0.26 and f1/0/0.6 both connect to one switchport on
>the switch. I think it should be subinterfaces on two different
>interfaces of R6 <connecting to 2 different switchports on 3550> and
>hence each having 6 and 26 as native VLANs on the trunk ports.
>Pls. correct me if this is not a mistake...
>thanks
>
>Nadeem
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:52 GMT-3