Re: Frame-Relay PPP issues? Help would be great!

From: Wireman (int_s0@earthlink.net)
Date: Wed Oct 19 2005 - 15:57:49 GMT-3

• Next message: Scott Morris: "RE: LAB 9 CCIE Practical Studies VolumeII IP Multicast Chapter."
• Previous message: De Witt, Duane: "RE: About ip cef enabling"
• Maybe in reply to: Wireman: "Frame-Relay PPP issues? Help would be great!"
• Next in thread: Shaikh, Nasir: "RE: Frame-Relay PPP issues? Help would be great!"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Thanks that worked!!

-----Original Message-----
From: Aleksander Klessa <aleksander.klessa@atm.com.pl>
Sent: Oct 19, 2005 12:47 PM
To: Wireman <int_s0@earthlink.net>
Cc: ccielab@groupstudy.com
Subject: Re: Frame-Relay PPP issues? Help would be great!

do:
no ip cef

alek

Wireman wrote:
> I'm working on frame PPP that looks like this-
>
>
> R5----FR----R1
> |
> FR
> |
> R2------PPP/FR-----R3
>
> R5-R2-R1 are in OSPF area 0 - with R5 as the DR
> R2 and R3 are in OSPF area 1
>
> I can see the routes on all routers but can not ping or telnet to R3 from R5 or R1
> R2 has full reachablity -
> From R5, I can ping the outgoing interface on R2 towards R3
> When i trace from R5 to R3 the trace stops at R2
>
> I know it has to be a problem with my ppp config because if i go back just the point-to-point interface everything works fine.
>
> I'm sure this must be something simple that I'm doing wrong...I have been messing with it for a couple of hours and can't get anywhere.
> Can anyone help me with this ppp config?
> Is it possible I'm having problems with my FR switch?
>
>
> Thanks
> Justin Wireman
>
> my PPP config looks like this
>
>
> ---R2----
> interface Serial1/1
> no ip address
> encapsulation frame-relay
> no frame-relay inverse-arp
> !
> interface Serial1/1.23 point-to-point
> ip address 172.12.23.2 255.255.255.0
> frame-relay interface-dlci 213 ppp Virtual-Template 1
>
> interface Virtual-Template1
> ip unnumbered Serial1/1.23
>
> ---R3---
> interface Serial0/0
> no ip address
> encapsulation frame-relay
> no frame-relay inverse-arp
>
> interface Serial0/0.23 point-to-point
> ip address 172.12.23.3 255.255.255.0
> frame-relay interface-dlci 312 ppp Virtual-Template1
> !
> interface Virtual-Template1
> ip unnumbered Serial0/0.23
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

• Next message: Scott Morris: "RE: LAB 9 CCIE Practical Studies VolumeII IP Multicast Chapter."
• Previous message: De Witt, Duane: "RE: About ip cef enabling"
• Maybe in reply to: Wireman: "Frame-Relay PPP issues? Help would be great!"
• Next in thread: Shaikh, Nasir: "RE: Frame-Relay PPP issues? Help would be great!"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:51 GMT-3