manual VTP pruning

From: De Witt, Duane (duane.dewitt@siemens.com)
Date: Wed Oct 19 2005 - 05:32:44 GMT-3

Next message: Harri Makela: "837 connectivity with VPN 3005"
Previous message: kumara.shunmugam@wipro.com: "RE: How to enable 'Broadcast' in Classical IP"
Next in thread: kevin gannon: "Re: manual VTP pruning"
Maybe reply: kevin gannon: "Re: manual VTP pruning"
Maybe reply: De Witt, Duane: "RE: manual VTP pruning"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi All

In IEWB V1 Lab 16 VTP is running in transparent mode between the two
switches. The requirement is to manually configure the network to behave
like pruning is enabled.

The only VLAN's common to both switches is 22 and 55, so my logic tells
me that those are the only VLAN's that should be allowed on the trunk.
The solution however allows all VLAN's on the remote switch.

Any ideas why this is?

Regards

Duane

____________________________________________
SIEMENS Siemens Business Services
Siemens Service Center

126 14th Road

Erand Gardens

Midrand

South Africa

* +27 11 5452555
* +27 83 4452768
* +27 11 5415219
* duane.dewitt@siemens.com <mailto:duane.dewitt@siemens.com>

Next message: Harri Makela: "837 connectivity with VPN 3005"
Previous message: kumara.shunmugam@wipro.com: "RE: How to enable 'Broadcast' in Classical IP"
Next in thread: kevin gannon: "Re: manual VTP pruning"
Maybe reply: kevin gannon: "Re: manual VTP pruning"
Maybe reply: De Witt, Duane: "RE: manual VTP pruning"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:51 GMT-3