From: Thomwin Chen (thomwin_chen@yahoo.com)
Date: Mon Oct 17 2005 - 14:52:03 GMT-3
currently I don't have ATM equipment to test this,
but I think it will be in the virtual-template interface...
The Great Ryan <pv.ryan@gmail.com> wrote:
Hi,
If I have the following interface that using virtual-template
!
interface atm1/0
pvc 0/1
encapsulation aal5ciscoppp virtual-template 2
!
interface virtual-template 2
ip address 192.168.1.1 255.255.255.0
!
where I should place the "ip bandwidth eigrp" command ? In Atm
interface or virtual-template interface ?
It is because I can't find any show command to verify how many
percentage that eigrp use.
Thanks !
Ryan
2005/10/17, Thomwin Chen :
> police or shape average ? :)
>
> but if it's about the Lab, I think method 1 will be preferred as the correct
> answer...
>
> just keep it simple :)
>
>
> The Great Ryan
wrote:
> Hi Group,
>
> One easy question but I want to double confirm.
> If I only want to allow EIGRP Routing Protocol 10Mbps (Max) traffic on
> Fastethernet interface, can I accomplis by the following methods?
>
> Method 1:
> =========
> interface f0/0
> ip bandwidth-percent eigrp 1 10
>
> Method 2:
> ========
> interface f0/0
> bandwidth 20000
> ! Because it use 50% as eigrp routing protocol, by default.
>
>
> Any more method ?
>
> Thanks a lot!
> Ryan
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> ________________________________
> Yahoo! Music Unlimited - Access over 1 million songs. Try it free.
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:51 GMT-3