From: Chris Lewis (chrlewiscsco@yahoo.com)
Date: Fri Oct 14 2005 - 16:19:25 GMT-3
Last I looked, one could not change the AD of specific EIGRP external routes. I believe it is the way the protocol works, or more specifically, the way the programmer coded it :)
Chris
Dave Mumford <Dave.Mumford@telindus.co.uk> wrote:
Just getting back into ccie study after a year long lay off and having
problems with mutual redistribution points.
I am redistributing between 2 routers running eigrp and ospf. I am receiving
external eigrp routes from within the eigrp a/s and redistributing these out
at the 2 routers into ospf, this ofcourse causes a loop situation as the eigrp
external routes appear more attractive via ospf. I've modified the distance in
eigrp for these particular external eigrp routes tied down by an access-list:
!
router eigrp 100
Distance 109 0.0.0.0 255.255.255.255 10
!
Access-list 10 permit 150.1.6.0 0.0.0.255
!
for some reason the AD is not changed for this route, this works fine for
internal routes ?
Any help appreciated
Thanks,
Dave.
This e-mail is private and may be confidential and is for the intended
recipient only. If misdirected, please notify us by telephone and confirm
that it has been deleted from your system and any copies destroyed. If you
are not the intended recipient you are strictly prohibited from using,
printing, copying, distributing or disseminating this e-mail or any
information contained in it. We use reasonable endeavours to virus scan all
e-mails leaving the Company but no warranty is given that this e-mail and any
attachments are virus free. You should undertake your own virus checking.
The right to monitor e-mail communications through our network is reserved by
us.
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:51 GMT-3