From: Matt White (mwhite23@gmail.com)
Date: Fri Oct 14 2005 - 12:02:22 GMT-3
Thanks for the great responses guys. This helps tremendously.
Out of curiosity Gustavo, which version of the code are you using?
Matt
#14533
On 10/14/05, Gustavo Novais <gustavo.novais@novabase.pt> wrote:
>
> Hello
>
> I think this can be a error on Documentation. You have to force the
> native vlan to bridge-group 1, but you can use whatever native vlan you
> wish. (At least I do it, and it works!).
> You can argue if you should create the Dot11radio subinterface that
> belongs to management. I personally create it and shut it down, just for
> keeping stuff organized.
> See the config below.
>
> interface Dot11Radio0
> no ip address
> no ip route-cache
> !
> encryption vlan 511 mode ciphers wep128
> !
> broadcast-key vlan 511 change 1800
> !
> !
> ssid e-U
> vlan 511
> max-associations 20
> authentication open eap RADIUS_AUTH
> authentication network-eap RADIUS_AUTH
> accounting RADIUS_ACC
> mobility network-id 511
> !
> ssid guest_e-U
> vlan 510
> max-associations 10
> authentication open
> guest-mode
> mobility network-id 510
> !
> short-slot-time
> speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0
> 36.0 48.0 54.0
> rts threshold 2312
> station-role root
> no cdp enable
> !
> interface Dot11Radio0.510
> encapsulation dot1Q 510
> no ip route-cache
> no cdp enable
> bridge-group 10
> bridge-group 10 subscriber-loop-control
> bridge-group 10 block-unknown-source
> no bridge-group 10 source-learning
> no bridge-group 10 unicast-flooding
> bridge-group 10 spanning-disabled
> !
> interface Dot11Radio0.511
> encapsulation dot1Q 511
> no ip route-cache
> no cdp enable
> bridge-group 11
> bridge-group 11 subscriber-loop-control
> bridge-group 11 block-unknown-source
> no bridge-group 11 source-learning
> no bridge-group 11 unicast-flooding
> bridge-group 11 spanning-disabled
> !
> interface Dot11Radio0.593
> description -=SHUTDOWN=-
> encapsulation dot1Q 593 native
> no ip route-cache
> shutdown
> no cdp enable
> bridge-group 1
> bridge-group 1 subscriber-loop-control
> bridge-group 1 block-unknown-source
> no bridge-group 1 source-learning
> no bridge-group 1 unicast-flooding
> bridge-group 1 spanning-disabled
> !
> interface FastEthernet0
> no ip address
> no ip route-cache
> duplex auto
> speed auto
> !
> interface FastEthernet0.510
> encapsulation dot1Q 510
> no ip route-cache
> bridge-group 10
> no bridge-group 10 source-learning
> bridge-group 10 spanning-disabled
> !
> interface FastEthernet0.511
> encapsulation dot1Q 511
> no ip route-cache
> bridge-group 11
> no bridge-group 11 source-learning
> bridge-group 11 spanning-disabled
> !
> interface FastEthernet0.593
> encapsulation dot1Q 593 native
> no ip route-cache
> bridge-group 1
> no bridge-group 1 source-learning
> bridge-group 1 spanning-disabled
> !
> interface BVI1
> ip address dhcp client-id FastEthernet0
> no ip route-cache
> !
> no ip http server
> ip http secure-server
> ip http help-path
> http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
> bridge 1 route ip
> bridge 10 protocol ieee
> bridge 11 protocol ieee
> !
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Matt White
> Sent: sexta-feira, 14 de Outubro de 2005 7:49
> To: Group Study
> Subject: Catalyst Switch and Wireless AP - 802.1q Trunk...
>
> Anyone ever use a non-1 native vlan when trunking VLAN's from a 35X0 to
> a 1230 AP? I like 999 for my native, don't use 1 at all, and 900
> - 950 for data, voice, video, blah, blah... the AP did not appear to
> appreciate this, and I found this link on CCO, but it did not make much
> sense to me:
>
> http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo1200/
> accsspts/b1237ja/i1237sc/s37vlan.htm#wp1038979
>
> Thanks for any input!
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:51 GMT-3