From: Rosi Mario (mario.rosi@ins.com)
Date: Wed Oct 12 2005 - 17:52:00 GMT-3
Thanks,
I found it
R(config)#partition flash 1 16
Mario
-----Original Message-----
From: Larry Letterman (lletterm) [mailto:lletterm@cisco.com]
Sent: mercoledl 12 ottobre 2005 22.47
To: Rosi Mario; ccielab@groupstudy.com
Subject: RE: Copy tftp 2 flash?! :-(
Yes you can re-partition the two banks into one bank..I don't recall the
Exact command, but its not that hard to do....
Larry Letterman
INS-NW-WEST
Cisco Systems
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Rosi Mario
Sent: Wednesday, October 12, 2005 3:42 PM
To: ccielab@groupstudy.com
Subject: Copy tftp 2 flash?! :-(
I all,
A stupid problem but for me without solution unlikely NOW!!!
I have simply to copy a IOS release on 2500 with 2 8M banks of flash on
board (flash:1: and flash:2:); the release is more or less 15M; how can
I copy the IOS into the flash?
If I use: copy tftp: flash: --> it doesn't work, bad command!!!
If I use: copy tftp: flash:1: --> not enough memory
...is it possible that I cannot join two flash banks and consider them
one of 16M?
Thanks
Mario
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:50 GMT-3