From: Ashok M A (ashok_ccie@yahoo.co.in)
Date: Wed Oct 12 2005 - 08:08:28 GMT-3
Hi,
Just thought of sharing some info on multicast
rate-limit.
Info is self explanatory. Just have a look..
-Ashok
~~~~~~~~~~~~
R2#sri e0
Building configuration...
Current configuration : 193 bytes
!
interface Ethernet0
ip address 22.22.22.2 255.255.255.0
ip pim sparse-dense-mode
ip multicast rate-limit in group-list 9 source-list
76 2
no ip mroute-cache
end
R2#
R2#al 9
Standard IP access list 9
permit 224.0.0.0, wildcard bits 7.255.255.255 (546
matches)
R2#al 76
Standard IP access list 76
permit 22.22.22.8 (465 matches)
R2#
R7#pi 224.1.1.5 repeat 10 size 2000
Type escape sequence to abort.
Sending 10, 2000-byte ICMP Echos to 224.1.1.5, timeout
is 2 seconds:
Reply to request 0 from 20.1.1.254, 1112 ms
Reply to request 0 from 20.1.1.254, 1704 ms
R8#pi 224.1.1.5 repeat 10 size 2000
Type escape sequence to abort.
Sending 10, 2000-byte ICMP Echos to 224.1.1.5, timeout
is 2 seconds:
..........
R8#
R2#
2d23h: IP: s=22.22.22.8 (Ethernet0) d=224.1.1.5 len
1514, input rate-limited
2d23h: IP: s=22.22.22.8 (Ethernet0) d=224.1.1.5 len
534, input rate-limited
2d23h: IP: s=22.22.22.7 (Ethernet0) d=224.1.1.5
(Serial0.56) len 1514, mforward
2d23h: IP: s=22.22.22.7 (Ethernet0) d=224.1.1.5
(Serial0.56) len 1514, mforward
R2#
R8#pi 232.1.1.5 repeat 10 size 2000
Type escape sequence to abort.
Sending 10, 2000-byte ICMP Echos to 232.1.1.5, timeout
is 2 seconds:
Reply to request 0 from 20.1.1.254, 924 ms
4d14h: ICMP: echo reply rcvd, src 20.1.1.254, dst
22.22.22.8
~~~~~~~~
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:50 GMT-3