From: Dave Temkin (dave@ordinaryworld.com)
Date: Tue Oct 11 2005 - 12:26:56 GMT-3
See:
http://www.net130.com/CMS/Pub/Tech/tech_zh/2005_09_13_81430.htm
-Dave
On Tue, 11 Oct 2005, The Great Ryan wrote:
> Hi,
>
> can you post the configuration of how to sending unicast packets in RIP by NAT ?
> Someone asked me before but I don't know how to achieve it.
> Thanks !
>
>
> Ryan
>
>
> 2005/10/11, Victor Cappuccio <cvictor@protokolgroup.com>:
> > Add This One:
> > You Can use RIP V2 to send unicast packets using the neighbor command
> > and if this is not permitted we can also use a Static PAT to the
> > Outside, translating the multicast address to the remote neighbor.
> >
> >
> >
> > Hilgendorf, Sam wrote:
> >
> > >?
> > >Okay, I haven't seen any recent posts on these, and I haven't been able to find anything resembling this in the archives.
> > >
> > >So, I've started creating a list of popular tasks that I have found that have multiple ways of accomplishing the same goal. This list is far, far from complete, which is why I'd like to start some dialogue on the other topics that fit this mold. (My first attempt included several questions on using a 3rd way, which at the time, I, of course, only knew two of.)
> > >
> > >So, to begin:
> > >
> > >
> > >
> > >ISDN Backup - 3 Ways (Floating Static, Backup Interface, and Dialer Watch)
> > >
> > >Advertising Loopbacks with Masks in OSPF - 3 Ways (ip ospf network, redistribute, and summarization at an ABR)
> > >
> > >Troubleshooting Neighbor Relationships for OSPF over NMBA - 2 Ways (ip ospf network, hello timer)
> > >
> > >Advertising Connected Networks in IS-IS - 3 Ways (ip router isis, Passive Interface, Redistribute Connected)
> > >
> > >Assigning RP in Multicast - 3 Ways (Static, Auto-RP, BSR Candidates)
> > >
> > >Limiting bandwidth in QoS for a specific host - 3 Ways, at least. (Rate-Limiting, Policing, Shaping)
> > >
> > >
> > >
> > >That's the list I've come up with so far, please add to it, dispute it. As, knowing how many ways of doing something seems to be very helpful when trying to figure out how much you need to know about a topic.
> > >
> > >Thanks,
> > >James (Sam) Hilgendorf
> > >Berbee
> > >Network Engineer
> > >N14W23833 Stone Ridge Drive, Suite 100
> > >Waukesha, WI 53188
> > >Phone: 262.521.5651
> > >Fax: 262.523.5642
> > >Cell: 414.617.9745
> > >sam.hilgendorf@berbee.com <mailto:sam.hilgendorf@berbee.com>
> > >http://www.berbee.com <http://www.berbee.com/>
> > >
> > >_______________________________________________________________________
> > >Subscription information may be found at:
> > >http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:50 GMT-3