From: kevin gannon (kevin@gannons.net)
Date: Fri Oct 07 2005 - 15:55:43 GMT-3
I am based in Europe and over here to get a single number to answer
two calls the telco would have to configure a hunt group. So if you
get a call to 2031234 it would divert the call to one of the two real
numbers on the basic rate circuit say 2031234 or 2031235 its
works both ways.
Maybe there is an option for hunt groups on your simulator ?
Just a thought.
Regards
Kevin
On 10/7/05, Javier Tomi <fjtm@tid.es> wrote:
> Hi all,
>
> R1 -- ISDN(BRI0/0) -- R2
>
> I am trying to configure ppp multilink on legacy ISDN bringing up both
> B-channels from the beginning. This are my configs...
>
> On R1...
>
> interface BRI0/0
> ip address 142.1.45.4 255.255.255.0
> encapsulation ppp
> dialer order round-robin
> dialer map ip 142.1.45.5 name R2 broadcast 5552026
> dialer map ip 142.1.45.5 name R2 broadcast 5552027
> dialer-group 1
> isdn switch-type basic-dms100
> isdn spid1 21255520240101 5552024
> isdn spid2 21255520250101 5552025
> ppp authentication chap
> ppp multilink
> ppp multilink links minimum 2
> end
>
> On R2...
>
> interface BRI0/0
> ip address 142.1.45.5 255.255.255.0
> encapsulation ppp
> dialer idle-timeout 0
> dialer map ip 142.1.45.4 name R1 broadcast 5552024
> dialer map ip 142.1.45.4 name R1 broadcast 5552025
> isdn switch-type basic-dms100
> isdn spid1 21255520260101 5552026
> isdn spid2 21255520270101 5552027
> ppp authentication chap
> ppp multilink
> end
>
> For some reason (may the ISDN simulator or the switch-type or something
> else...) the only way I get this work is by defining both isdn spids and
> configuring both isdn map statements. I also need to include the "dialer
> order round-robin" to aboid R1 keep trying to call using always the
> first dialer map command.
>
> My question is the following:
>
> Why are both dialer map statements required to make this work?. And what
> about both ISDN spids? My ISDN simulator is configured to require spids,
> but does this make both spids to be required?...
>
> Thank you in advance
>
> Javi
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:49 GMT-3