From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Thu Oct 06 2005 - 20:49:27 GMT-3
What about a summary-address ?
This Router should be an ASBR right?
Dave Temkin wrote:
>OK, so let's say the basic rules of this practice lab are no default
>routes allowed,
>that wouldn't work.... Any other ideas?
>
>Thanks,
>-Dave
>
>On Thu, 6 Oct 2005, Scott Morris wrote:
>
>
>
>>You can't make an external route into an internal one.... That would
>>violate a few rules.
>>
>>If the network resides on an EIGRP and OSPF router, you could always simply
>>use the network command with passive-interface for it.
>>
>>Otherwise, you can consider putting a 0/0 route into the NSSA area as
>>default-information or as no-summaries to get reachability.
>>
>>Scott
>>
>>-----Original Message-----
>>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Dave
>>Temkin
>>Sent: Thursday, October 06, 2005 6:53 PM
>>To: dusth@comcast.net
>>Cc: Jian Gu; ccielab@groupstudy.com
>>Subject: Re: Converting an external route to internal?
>>
>>Dustin,
>>
>> I tried that and it didn't work. It looks liek that command is only
>>for ISIS and BGP.
>>
>>Thanks,
>>-Dave
>>
>>On Thu, 6 Oct 2005 dusth@comcast.net wrote:
>>
>>
>>
>>>Here is the example route-map is used while redistribution eigrp to
>>>ospf
>>>
>>>route-map test permit 10
>>> set metric-type internal
>>>
>>>dustin
>>>
>>>-------------- Original message --------------
>>>
>>>
>>>
>>>>Interesting thought, but why would anybody want to inject external
>>>>routes (from area 0) to NSSA area? he would better off change the
>>>>NSSA area to normal area.
>>>>
>>>>On 10/6/05, dave@ordinaryworld.com wrote:
>>>>
>>>>
>>>>>Given a route that's external (redistributed in from EIGRP in this
>>>>>case...), is there any way to make it appear internal so that it
>>>>>can be
>>>>>
>>>>>
>>>>sent
>>>>
>>>>
>>>>>into a NSSA area (set with no-redistribution because it's not
>>>>>allowed to
>>>>>
>>>>>
>>>>get
>>>>
>>>>
>>>>>external routes as per the rules of the question)?
>>>>>
>>>>>I've tried summary-address, which just gives an external summary,
>>>>>and area range doesn't work because it's an external routes..
>>>>>
>>>>>Just wondering if anyone had any thoughts..
>>>>>
>>>>>-Dave
>>>>>
>>>>>__________________________________________________________________
>>>>>_____ Subscription information may be found at:
>>>>>http://www.groupstudy.com/list/CCIELab.html
>>>>>
>>>>>
>>>>____________________________________________________________________
>>>>___ Subscription information may be found at:
>>>>http://www.groupstudy.com/list/CCIELab.html
>>>>
>>>>
>>>______________________________________________________________________
>>>_ Subscription information may be found at:
>>>http://www.groupstudy.com/list/CCIELab.html
>>>
>>>
>>_______________________________________________________________________
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
>>
>>_______________________________________________________________________
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
>>
>>
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:49 GMT-3