From: Niche (jackyliu419@gmail.com)
Date: Tue Oct 04 2005 - 23:19:11 GMT-3
Hi,
If you are using legacy configuration approach (physical interface) and the
question does not require you to do routing over ISDN. Simply just don't put
"broadcast" in the "dialer map ip" line should be ok.
Cheers~
Jacky
On 10/5/05, cscoitit cscoitit <cscoitit@yahoo.ca> wrote:
>
> Hi,
>
> I am doing a workbook question and it asks to allow icmp and deny
> broadcast and multicast. what is the correct solution.
> I like to confirm whether these accomplishes the task.
>
> acl 101 permit icmp any any
> acl 101 deny ip any host 255.255.255.255 <http://255.255.255.255>
> acl 101 deny ip any 224.0.0.0 <http://224.0.0.0>
15.255.255.255<http://15.255.255.255>
>
> HTH
> cscoitit
>
>
> ---------------------------------
> Find your next car at Yahoo! Canada Autos
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:49 GMT-3