From: asadovnikov (asadovnikov@comcast.net)
Date: Sun Oct 02 2005 - 22:25:20 GMT-3
Dennis,
All DLSW peering is this scenario is TCP based. No DLSW specific frame
relay maps are needed when TCP encapsulation is used; also configurations
for this scenario do not include any frame-relay map bridge commands.
Best Regards,
Alexei
-----Original Message-----
From: Dennis J. Hartmann [mailto:dennisjhartmann@hotmail.com]
Sent: Sunday, October 02, 2005 9:01 PM
To: 'Cisco certification'; Alexei
Subject: NMC Scenario# 20 / DLSW Question
The answer key to NMC scenario # 20 does not include any frame-relay map
bridge or frame-relay map dlsw configurations to enable DLSW TCP based
peering over Frame-Relay major Serial interfaces.
I don't believe this would work since we're bridging DLSW traffic. I
believe that this would require a frame-relay map bridge command for the
bridge-group(s) which need to be forwarded over the Frame cloud.
If the DLSW peering was using direct Frame-Relay encapsulation, then I
would need to enable the frame-relay map dlsw command, but not the
frame-relay map bridge command.
Can anyone verify / disprove this information?
Sincerely,
Dennis J. Hartmann
White Pine Communications
CCSI#23402 / CCVP / CCIP / CCNP
Cisco Optical, VPN & IDS Specialist
MCSE
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:49 GMT-3