From: Holmes (iamholmes@eml.cc)
Date: Sun Oct 02 2005 - 07:59:55 GMT-3
Hi all -
My 2950 switch is running only a 12.1 Catalyst IOS.
I want to run a simple router-on-a-stick setup, but I can't find
any way to specify the kind of encapsulation I'm going to use on
the switch. (I've worked on this for more than 2 hours).
What am I missing here ?
Switch(config-if)#switchport mode trunk
Switch(config-if)#switchport tr
Switch(config-if)#switchport trunk ?
allowed Set allowed VLAN characteristics when interface is in
trunking mode
native Set trunking native characteristics when interface is in
trunking
mode
pruning Set pruning VLAN characteristics when interface is in
trunking mode
Switch(config-if)#switchport trunk
Don't you normally have a
Switch(config-if)#switchport trunk encapsulation .. command ?
Surely the IOS I'm using isn't that old. Anyone any idea whats wrong
here ?
I don't have access to the Cisco site to download an IOS, so I haven't
been
able to determine if its the IOS thats the problem.
Switch#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(13)EA1, RELEASE
SOFTWARE
(fc1)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Tue 04-Mar-03 02:14 by yenanh
Image text-base: 0x80010000, data-base: 0x805A8000
ROM: Bootstrap program is CALHOUN boot loader
Switch uptime is 2 hours, 59 minutes
System returned to ROM by power-on
System image file is "flash:/c2950-i6q4l2-mz.121-13.EA1.bin"
cisco WS-C2950G-24-EI (RC32300) processor (revis
02:59:20: %SYS-5-CONFIG_I: Configured from console by consoleion
G0) with 20839K bytes of memory.
Processor board ID FOC0718Y01J
Last reset from system-reset
Running Enhanced Image
24 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:0C:CE:D4:DD:C0
Thanks for any pointers.
-- Holmes iamholmes@eml.cc-- http://www.fastmail.fm - Choose from over 50 domains or use your own
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:49 GMT-3