From: mani poopal (mani_ccie@yahoo.com)
Date: Fri Sep 30 2005 - 09:48:23 GMT-3
Hi Narcis,
May be wording might say inter-area, intra-area and
external. If interarea means type 5 LSA, external
means type 7 LSA.
PS:Be care full when the router is directley connted
to another routing protocol, in that case even if you
put area xxx nssa, you will not see type5 LSA BUT will
see type 7 LSA. The solution is no-redistribution
keywork with area xxx nssa statement. My 2 cents.
Mani
--- Scott Morris <swm@emanon.com> wrote:
> Well... You have multiple options for this... But
> I'd say it would depend
> on the rest of your layout!
>
> You can figure things like this out from reading the
> entire exam and looking
> closely at the diagram(s) while you do it! Both
> stub and nssa will filter
> out Type 5 LSAs (external routes). However, NSSA
> allows type 7 (also
> external). Sooooo... Your diagram, or any further
> requirements about
> "redistribute eigrp into area X" will really answer
> that question for you.
>
> Cheers,
>
> Scott
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of
> micsoniu@telus.net
> Sent: Thursday, September 29, 2005 2:59 PM
> To: ccielab@groupstudy.com
> Subject: OSPF STUB or NSSA ???
>
> Hi,
>
> I have a problem understanding the following
> statement:
>
> "Do not allow external networks into area X"
>
> How do I know that this is reffering to Type 5 LSAa
> or Type 7 LSAs ?
>
> Much appreciated !
>
> Narcis
>
>
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:17 GMT-3