From: Quetta Walla (quetta_1@lycos.com)
Date: Wed Sep 28 2005 - 16:17:38 GMT-3
In this task, sw2 is in middle of r5 and r1with EIGRP running. And the task says that sw2 should not be used as transit between r5 and r1
r5---156.1.58.0--SW2--156.1.18.0--r1
r1 cannot use sw2 to get to 156.1.58.0 and r5 cannot use sw2 to get to q56.1.18.0. The solution says:
on sw2
router eigrp 10
eigrp stub connected
With this command r1 is still showing sw2 as next hop to get to 156.1.58.0 and same applies to r5.
If I do:
sw2
router eigrp 10
eigrp stub receive-only
then it does what the task requires.
Any comments.
Thanks
--
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:17 GMT-3