From: Nawaz, Ajaz (Ajaz.Nawaz@bskyb.com)
Date: Tue Sep 27 2005 - 08:08:37 GMT-3
If you have another 2500 flash and dram in working order, I would replace
them just to make sure memory hasn't become corrupted.
After this I would go for xmodem using a basic IP image. With a bit of luck
this should bring you back to CLI.
Hth
Ajaz Nawaz
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
simon hart
Sent: 27 September 2005 11:32
To: Group Study
Subject: Unable to restart 2500
Hi all,
Wonder if someone can help. I was trying to change an image on one of my
2500's. The tftp failed, however I think the router erased the original
image. Now when I switch on the router I cannot get to the command line,
the following is the output of the reboot. I get the press Return to start
prompt, but nothing else happens. Is there anything I can do to remedy
this??
System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
Copyright (c) 1986-1995 by cisco Systems
2500 processor with 16384 Kbytes of main memory
Loading cisco2-2500 ... [timed out]
File read failed -- Time out
System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
Copyright (c) 1986-1995 by cisco Systems
2500 processor with 16384 Kbytes of main memory
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE
SOFTWARE (fc1)
Copyright (c) 1986-1995 by cisco Systems, Inc.
Compiled Tue 24-Oct-95 15:46 by mkamson
Image text-base: 0x01020000, data-base: 0x00001000
cisco 2500 (68030) processor (revision A) with 16380K/2048K bytes of memory.
Processor board serial number 01209921 with hardware revision 00000000
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Press RETURN to get started!
-- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.11.7/112 - Release Date: 26/09/2005
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:16 GMT-3