From: Scott Smith (hioctane@gmail.com)
Date: Mon Sep 26 2005 - 22:41:06 GMT-3
No IGP or static routes.
If I place a single static route on BB3 to (128.1.0.0/24) and only use..
"ip nat inside source static 204.12.1.254 128.1.0.5" ... on BB3 it
works but how would I use NAT and no static routes (or IGP)?
The config from R1 to BB3 is correct it is the return from BB3 to R1
that is hosed. I dont understand why R3 responds to the ping to
"204.12.1.20" instead of translating to the IP of R1.
-- Scott SmithOn 9/26/05, Niche <jackyliu419@gmail.com> wrote: > Hi, > > Any static route or routing in between them? > > Cheers~ > Jacky > > > On 9/27/05, John Matus <John.Matus@tokiom.com> wrote: > > > > i would think that you would stil be able to use PAT in this task for both > > routers > > > > <for both routers> > > > > ip nat inside souce-list 1 int s0/0 overload <you could also use the lo0 > > here> > > > > access-list 1 permit 204.12.1.0 > > > > give it a try. let me know if it works. > > > > > > Regards, > > > > John D. Matus > > Technical Support / PAS > > Fujitsu Consulting > > 626-568-7716 > > John.Matus@tokiom.com > > > > > > > > Scott Smith > > <hioctane@gmail.c > > om> > To > > Sent by: groupstudy <ccielab@groupstudy.com> > > nobody@groupstudy > cc > > .com > > > Subject > > NAT question > > 09/26/2005 09:17 > > AM > > > > > > Please respond to > > Scott Smith > > <hioctane@gmail.c > > om> > > > > > > > > > > > > > > I'm attempting to allow BB3 and R1 to communicate with neither having > > a route to the other. > > > > When I ping from R1 to BB3 the translation works but no response is > > received on R1. When I ping 204.12.1.20 from BB3 R3 replies (should > > it??) and no translation is attempted. Would someone be kind enough to > > tell me what I'm doing wrong? > > > > > > R1 ---- R3 ---- BB3 > > > > R3 Config: > > > > interface Ethernet0/0 > > ip address 128.1.0.3 255.255.255.0 > > ip nat outside > > > > interface Ethernet0/1 > > ip address 204.12.1.3 255.255.255.0 > > ip nat inside > > > > ip nat inside source static 204.12.1.254 128.1.0.5 > > ip nat outside source static 128.1.0.1 204.12.1.20 > > > > R1 config: > > > > interface Ethernet0/0 > > ip address 128.1.0.1 255.255.255.0 > > > > BB3 Config: > > > > interface Ethernet0/0 > > ip address 204.12.1.254 255.255.255.0 > > > > > > -- > > Scott Smith > > > > > _______________________________________________________________________ > > Subscription information may be found at: > > http://www.groupstudy.com/list/CCIELab.html > > > > > _______________________________________________________________________ > > Subscription information may be found at: > > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:16 GMT-3