From: simon hart (simon@harttel.com)
Date: Sat Sep 24 2005 - 19:39:16 GMT-3
Point to note with storm control Multicast. When the threshold for Mcast is
exceeded then all Unicast, broadcast and Mcast is blocked. Depending on the
question, then storm-control multicast may not be a good option
Simon
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Schulz, Dave
Sent: 24 September 2005 20:54
To: Nawaz, Ajaz ; nobody@groupstudy.com; Rajib Khan ; ccielab@groupstudy.com
Subject: RE: multicast rate-limit
You also may want to keep the storm-control command in your backpocket, when
needed to limit traffic types on your switch ports. Just an additional
thought.
Dave
-----Original Message-----
From: nobody@groupstudy.com
To: Rajib Khan; ccielab@groupstudy.com
Sent: 9/24/2005 2:40 PM
Subject: RE: multicast rate-limit
I think you are looking for this...
<ftp://ftpeng.cisco.com/ipmulticast/config-notes/multicast-rate-limit.tx
t>
Hth
Ajaz Nawaz
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Rajib Khan
Sent: 24 September 2005 18:06
To: ccielab@groupstudy.com
Subject: multicast rate-limit
Hi Group,
Does any one know any good link for "ip multicast rate-limit". I just
want
to see some configuration example.
Thanks in advance
Raj
---------------------------------
Yahoo! for Good
Click here to donate to the Hurricane Katrina relief effort.
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:16 GMT-3