From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Fri Sep 23 2005 - 17:47:42 GMT-3
It should go under the subinterface. Remember that the physical
interface will go down when it stops receiving LMI from the switch. The
subinterface will go down when the DLCI status changes.
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
charlie@hanaro.com
Sent: Friday, September 23, 2005 12:10 PM
To: ccielab@groupstudy.com
Subject: Backup interface command under frame relay subinterface?
Hello,
R1#sh run int s 0/0
no ip addr
encap frame-relay
no frame-relay inv
R1#sh run int s 0/0.1 multipoint
ip addr 10.1.1.1 255.255.255.0
frame-relay map ip 10.1.1.2 102 broad
frame-relay map ip 10.1.1.3 103 broad
no frame-relay inv
========================
If I need to apply "backup interface bri 0/0" command for isdn
backup,
which one is better place? int s 0/0 ? or int s
0/0.1
?
Thank you in advance.
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:16 GMT-3