From: Bob Sinclair (bob@bobsinclair.net)
Date: Thu Sep 22 2005 - 14:15:06 GMT-3
Nick,
The isis network point-to-point command is available on ATM and FRAME physical
interfaces and multipoint subinterfaces, as well as FE, using 12.2T15, 3600
and 2600. Your mileage may vary on other IOS.
HTH,
Bob Sinclair
CCIE #10427, CCSI 30427, CISSP
www.netmasterclass.net
----- Original Message -----
From: Jaksec, Nick
To: CCIE (ccielab@groupstudy.com)
Sent: Thursday, September 22, 2005 11:16 AM
Subject: ISIS Network type command
When working with ISIS network type I noticed that the command "ISIS
Network
Point-to-Point" only exists under the Ethernet interfaces and not the
Frame-relay serial interfaces. Can you alter the ISIS network types on
Frame-relay interfaces like you can do with OSPF?
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:16 GMT-3