From: Jaycee Cockburn - BCX SS (Jaycee.Cockburn@bcx.co.za)
Date: Thu Sep 22 2005 - 13:52:00 GMT-3
Hi All,
Please tell me someone knows about this.
I have a mix of 2610 and 3745 routers running 12.2(15)T17 (Enterprise)
When I create a route-map with match clauses it works fine. As soon as I
put in any set command which include metric (localpref, metric and
weight) it will not take that command...See below
--------------------BEGIN-------------------
R2(config)#route-map TEST per 10
R2(config-route-map)#mat ip add 3
R2(config-route-map)#set met 200
200
R2(config-route-map)#
R2(config-route-map)#do sh route-map
route-map TEST, permit, sequence 10
Match clauses:
ip address (access-lists): 3
Set clauses:
Policy routing matches: 0 packets, 0 bytes
---------------------END------------------------
Now the acces-list 3 does exist.
As you can see as soon as you type in the set command, it returns with
the "metric" number on the new line...Is this a bug? I can't find
anything in the caveats and bugs (unless I am mislooking...)
Now, I reboot the router...And whallaa, I can edit the same route-map
and the set command works fine! I can even create a new route-map and do
set commands like mad...
Is this normal guys, how many other things like this exists?
Thanks in advance
Happy Labbing
Cheers
JC
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:16 GMT-3