From: Jens Petter Eikeland (jenseike@start.no)
Date: Tue Sep 20 2005 - 06:44:59 GMT-3
Hi group..
I am trying to get something to wor, bu tare unsure of what exactly to do..
This is the toplology :
Switch1--------r1--------r5-----------r2
|
|
R4
R1, r2,r4 and r5 is in a frame-relay nbma network. All the routers form a
single AS. I would guess that the normal thing here would be to
set r5 as route-reflector. But Switch 1 have to been reach from the network
by using bgp only.. so my question is. If I make r5 RR for r1, r2
and r4. Can I also then make r1 as route-reflector for switch1. Would this
be a scenario that is good to configure, or is there some other solution
that would be a better solution..
Thanks
Jens P
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:15 GMT-3