From: Niche (jackyliu419@gmail.com)
Date: Tue Sep 20 2005 - 04:34:54 GMT-3
Hi,
Yep, I did exactly what this document said. No good =/
Cheers~
Jacky
On 9/20/05, Godswill Oletu <oletu@inbox.lv> wrote:
>
> manually configure the the 'dialer wait-for-carrier-time <seconds>' on the
> remote router to be at least twice the value of the 'dialer enable-timeout
> <seconds>' on the local router.
> see if this link will help you....
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fdial
_c/fnsprt10/dafcalid.htm
> HTH
> Godswill Oletu
>
> ----- Original Message -----
> *From:* Niche <jackyliu419@gmail.com>
> *To:* Godswill Oletu <oletu@inbox.lv>
> *Cc:* ccielab@groupstudy.com
> *Sent:* Tuesday, September 20, 2005 2:57 AM
> *Subject:* Re: isdn call back problem
>
> Hi,
>
> Thanks for the reply =)
>
> I did configured "dialer wait-for-carrier-time <seconds>" on the remote
> router, no good..
>
> I tried these debug commands, the conclusion seem it's related to carrier
> timeout which I still haven't find a way to solve the problem.
>
> Did anyone can use this command to establish a callback connection
> successfully?
>
> Cheers~
> Jacky
>
> On 9/20/05, Godswill Oletu <oletu@inbox.lv> wrote:
> >
> > Jacky,
> >
> > You need to configure 'isdn caller <remote-number> callback' on the
> > local
> > router and also
> > 'dialer wait-for-carrier-time <seconds>' on the remote router.
> >
> > Check to see what your 'show dialer'; 'debug isdn event' and 'debug isdn
> >
> > q931' is giving you.
> >
> > HTH
> >
> >
> > ----- Original Message -----
> > From: "Niche" <jackyliu419@gmail.com>
> > To: < ccielab@groupstudy.com>
> > Sent: Tuesday, September 20, 2005 2:23 AM
> > Subject: isdn call back problem
> >
> >
> > > Hi Group,
> > >
> > > AFAIK, there are 2 way to configure ISDN call back
> > >
> > > 1. calling router: ppp callback request
> > > callback router: ppp callback accept,
> > > dialer map ip w/ class CALLBACK (e.g)
> > > map-class dialer CALLBACK w/ dialer callback-server username
> > >
> > > 2. By using "isdn caller <remote peer phone no> callback" command at
> > the
> > > callback side.
> > >
> > > So far, I don't have any problem with the first method.
> > >
> > > However, the 2nd method seems not working. I have been trying to copy
> > the
> > > lab workbook model answer but still no luck. May be it's isdn
> > simulator
> > > limitation?
> > >
> > > I have turned on debug dialer and it showed that the carrier timeout.
> > I
> > > have
> > > modified the isdn carrier timeout setting and also the callback time
> > > interval setting (make the callback happen sooner, like 2 seconds). No
> >
> > > good..
> > >
> > > Any body can give me some hints?
> > >
> > > Cheers~
> > > Jacky
> > >
> > >
> > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:15 GMT-3