From: Schulz, Dave (DSchulz@dpsciences.com)
Date: Tue Sep 20 2005 - 00:34:23 GMT-3
I believe that is it necessary for NBAR (if it is not enabled by default).
Dave
-----Original Message-----
From: nobody@groupstudy.com
To: manoj menon
Cc: Marvin Wu; Private Ryan; Cisco certification
Sent: 9/19/2005 4:06 PM
Subject: Re: which feature require to enable "ip cef" ?
ip load-sharing across WAN links also requires ip cef to be enabled.
On 9/19/05, manoj menon <manojmenon123@yahoo.com> wrote:
>
> Doesn't CAR require 'ip cef' enabled on the router ?
>
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
fqos_
c/fqcprt1/qcfcar.htm
>
> Marvin Wu <marvinwu@gmail.com> wrote:
> NBAR also, but.. why not keep ip cef enabled? cef is the default
switching
> method now anyway.
>
> -Marvin
>
>
> On 9/19/05, Private Ryan
> wrote:
> >
> > Some IOS feature require you to enable "ip cef".
> > Sometime, IOS may remind you to enable it, Sometimes, may not.
> > It is difficult to memorize when to enable "ip cef"
> >
> > As I remember, The following require "ip cef"
> > - ip verify unicast reverse-path
> > - CBWFQ
> >
> > any more ?
> >
> > Regards,
> > Ryan
>
>
>
> ---------------------------------
> Yahoo! for Good
> Click here to donate to the Hurricane Katrina relief effort.
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:15 GMT-3