From: Wing Lam (wing.lam@jossynergy.com)
Date: Fri Sep 16 2005 - 09:29:15 GMT-3
Dear all;
How about LDN (local Directory number)? Which switch type will use it?
Also, Which switch type would need to use different SPIDs or each
channel in BRI? (i.e. 2 SPIDs for BRI)
Thanks,
BBD
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Scott Morris
Sent: Saturday, September 10, 2005 1:09 AM
To: 'Dennis J. Hartmann'; ccielab@groupstudy.com
Subject: RE: ISDN SPIDS / When do you need manual configuration
There is no auto-detect of SPIDs.
Basic-NI (National ISDN-1) REQUIRES SPIDs. That's the spec.
Basic-5ess and basic-dms MAY have SPIDs, depends on who configured the
ISDN switch.
Other switch types don't use 'em.
Remember, SPIDs are pretty much a North American concept.
HTH,
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Dennis J. Hartmann
Sent: Friday, September 09, 2005 12:21 PM
To: ccielab@groupstudy.com
Subject: ISDN SPIDS / When do you need manual configuration
Does anyone know the switch types that do NOT require manual SPID
configuration (i.e. SPIDS are automatically detected from the service
provider)? Thanks!
Sincerely,
Dennis J. Hartmann
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:15 GMT-3