From: Jens Petter Eikeland (jenseike@start.no)
Date: Wed Sep 14 2005 - 07:26:29 GMT-3
Hi there,
A few of the NASes supported by Cisco Secure ACS either do not support "new
PIN mode" functionality or support it in a limited fashion. New PIN mode is
when token-card users can be required to enter new PINs at login.
The following two types of NASes do not support new PIN mode functionality:
* Cisco Secure VPN 3000 Concentrator
* Cisco Secure PIX Firewall
Additionally, Cisco IOS routers can support new PIN mode functionality with
specific configuration.
Regards
Jens Petter Eikeland
-----Opprinnelig melding-----
Fra: nobody@groupstudy.com [mailto:nobody@groupstudy.com] Pe vegne av Wing
Lam
Sendt: 14. september 2005 12:07
Til: ccielab@groupstudy.com
Emne: PIX 7.0 ACE authen
Dear Group;
Sorry for OT, has any body try to use PIX for client-to-site VPN
connect, which users will be authen by ACE secure token? Here I would
like to ask the following:
1) Can PIX connect to ACE Server directly without the use of Radius?
2) If yes, can this VPN client supports new PIN mode of this VPN
connection?
3) If no, can this VPN client supports new PIN mode of this VPN
connection by Radius authentication?
4) Any link can be reference?
Thanks a lot,
BBD
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:15 GMT-3