RE: acl issue

From: LeFort, Claude \(Design\) (Claude.Lefort@aliant.ca)
Date: Tue Sep 13 2005 - 19:22:49 GMT-3

• Next message: Tim: "RE: QoS- Policing Method"
• Previous message: Ali.Huang: "acl issue"
• Maybe in reply to: Ali.Huang: "acl issue"
• Next in thread: Ali.Huang: "Re: acl issue"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Try using the wildcard mask :-)

Access-list 22 permit 128.28.2.0 0.0.0.255

Claude

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ali.Huang
Sent: Tuesday, September 13, 2005 7:18 PM
To: Cisco certification
Subject: acl issue

Hi,group,
When I configure standard ACL for
128.28.2.0/24,but<http://128.28.2.0/24,but>it displays
0.0.0.0/24.why <http://0.0.0.0/24.why>?
r2(config)#access-list 22 per 128.28.2.0 <http://128.28.2.0>
255.255.255.0<http://255.255.255.0>
r2#sh run | in access-li
access-list 22 permit 0.0.0.0 <http://0.0.0.0>
255.255.255.0<http://255.255.255.0>

-- 
THX.
Ali.huang

• Next message: Tim: "RE: QoS- Policing Method"
• Previous message: Ali.Huang: "acl issue"
• Maybe in reply to: Ali.Huang: "acl issue"
• Next in thread: Ali.Huang: "Re: acl issue"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:15 GMT-3