From: Godswill Oletu (oletu@inbox.lv)
Date: Sun Sep 11 2005 - 20:03:03 GMT-3
the neighbor command ask the router to start using unicast instead of
multicast for the configured neighbor. both neighbors must be configured to
use unicast or multicast , else one neighbor will be sending and listening
on
the multicast address while the other is doing so on the unicast address.
this is the behaviour in eigrp, note that other protocols handles the
'neighbor'
command differently.
HTH
Godswill Oletu
----- Original Message -----
From: "Quetta Walla" <quetta_1@lycos.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, September 11, 2005 4:28 PM
Subject: EIGRP neigbor command
> Hello,
>
> How does neighbor x.x.x.x command work in EIGRP? Would it work if I want
> to unicast EIGRP packets to a single neighbor?
> Here is how I am trying to do it:
> router eigrp 100
> neighbor 204.12.1.254 e1
> netw 204.12.1.6 0.0.0.0
> no auto
>
> But I get this messege:
>
> 06:16:58: %DUAL-5-NBRCHANGE: IP-EIGRP 100: Neighbor 192.4.1.254
> (Ethernet1) is down: Static peer configured
>
> And the neighbor never comes up. It does come up after removing neighbor
> 204.12.1.254 e1 command. Any ideas?
>
> --
> _______________________________________________
>
> Search for businesses by name, location, or phone number. -Lycos Yellow
> Pages
>
> http://r.lycos.com/r/yp_emailfooter/http://yellowpages.lycos.com/default.asp?SRC=lycos10
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:14 GMT-3