From: Venkataramanaiah.R (vramanaiah@gmail.com)
Date: Sun Sep 11 2005 - 10:07:59 GMT-3
I faced a similar issue.. I guess what is required here is to configure IRDP
on both the routers, Is there any better solution to this problem?
-Venkat
On 9/11/05, Private Ryan <private_ryan2k1@yahoo.com> wrote:
>
> Hi,
>
> In dhcp server configuration, I can enter up to 8
> address for default-router. I tested the dhcp using
> router as a dhcp client. I found that it always use
> the 1st address as default gateway. even if I shutdown
> the 1st address in my network, the client will never
> use the 2nd address. When "address2 ... address8 "
> will be used ?
>
> Router(dhcp-config)# default-router address [address2
> ... address8]
>
> Another Question
> Configure DHCP for VLAN A subnet and R1 as default
> gateway. Use R2 as default gateway when R1 is down.
> You are not allowed to use HSRP. Should I use
> "address2 ... address8" for my solution?
>
> i.e. default-router R1 R2
>
> Thanks !
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:14 GMT-3