From: Mohammad Zahid Saeed (msaeed@uaeu.ac.ae)
Date: Sat Sep 10 2005 - 16:54:21 GMT-3
Dear All,
I have attached modem with the AUX port of my Terminal Server. Here is the
related configuration of chat-script and its relevant settings in line mode
of AUX port.
chat-script dial-uaeu ABORT ERROR "" "AT Z" OK "ATDT 7556333" TIMEOUT 60
CONNECT
">"
line aux 0
exec-timeout 0 0
script startup dial-uaeu
script connection dial-uaeu
script reset dial-uaeu
script activation dial-uaeu
modem InOut
transport input all
autoselect ppp
stopbits 1
speed 38400
flowcontrol hardware
Now if I start the script manually it dials stays in contact for one to two
minutes and then disconnects. Secondly when the line is reset, it does not
start the script. In debugging I saw a message like "trying to initiate
script for line activation" etc..
The server where I am trying to connect uses the phone number as password
with no user name required to login.
I appreciate any help regarding this. I want this to dial to my university
network and any time line is disconnected it shall redial automatically.
With Best Regards,
Mohammad Zahid Saeed
UAE
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:14 GMT-3